top of page
Hemisphere GNSS - SBX-4 DGPS Beacon OEM Board 1

SBX-4 DGPS Beacon OEM Board

DGPS Beacon Module

 

Provide a reliable source of differential corrections with the SBX-4 radiobeacon board that augments a separate GPS receiver with free accuracy-improving correction data from networks of beacon stations located throughout the world.

 

With dual-channel architecture to ensure the best station is always being decoded, the SBX-4 DGPS Beacon OEM Board delivers high performance reception and a wide range of functionality including the capability to be tuned to signal strength or station distance.

 

The SBX-4 outputs the industry standard RTCM SC-104 format accepted by differential-ready GPS receivers and can also be configured and monitored with NMEA 0183 protocol.

  • Operational:

    Channels 2-channel parallel tracking
    Frequency range

    283.5 - 325.0 kHz

    Channel spacing 500 Hz
    MSK bit rate: 50, 100 and 200 bps
    Decoding: RTCM 6/8

     

    Serial Interface:

    Serial Ports: 2 full-duplex
    Interface level: HCMOS, tracks input voltage
    Data connector: 2 x 12 0.1 in (.25 cm) header
    Data port baud rate: 4800, 9600, 19200, 38400 and 57600 baud
    Correction input/ output protocol: RTCM SC-104
    Data input/output format: NMEA 0183

     

    Environmental, Mechanical & Electrical:

    Supply Voltage:

    3.3 to 5.5 VDC

    Power Consumption:

    < 0.25 W @ 3.3 VDC (no antenna)

    Dimensions:

    76.2 mm L x 50.8 mm W x 13.8 mm H

    93.0 in L x 2.0 in W x 0.54 in H

    Weight 30g
    Operating Temperature: -40°C to +80°C

     

bottom of page